NOTE: The Look Keo 2 MAX White is available as a NON-CARBON pedal only.
For a more efficient and more comfortable pedal stroke, the Keo 2 MAX has a cleat contact surface area 12percent larger than the Keo Carbon. To further improve the transfer of power and longevity of the pedal, this surface area is made of stainless steel molded directly into the pedal body. At a mere 130 grams, the Keo 2 MAX is one of the lightest pedals in its category.
Reliability: Particular attention was focused on reliability and provided through features such as: a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last. The new line of Keo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing.
LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781). Adjustable Q-Factor: Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately. Use of these specific washers results in a Q-factor of 55mm versus the original 53mm.
I have had good service and useful technical advice. A couple of friends though have had a poor experience when purchasing bikes - long wait and poorly packed. All good with me but thought you should know not everyone has felt the same.